background image

14

Marking

Key Functions

Operating Mode Icon indicating that the device is currently operating 
in the cooling mode.

Operating Mode Icon indicating that the device is currently operating 
in the c hot water mode.

Operating Mode Icon indicating that the device is currently operating 
in the hot water mode.

Mode

Mode Selection Button: Upon touching the button, the device will 
enter the mode selection interface, allowing you to set the mode.

45.5°C

The target temperature refers to the desired temperature value 
corresponding to the current mode.

Target

Target Temperature Setting Button: Upon touching the button, the 
device will enter the target temperature setting interface, allowing you 
to set the target temperature for the current mode.

24.5°C

The outlet water temperature, which refers to the current temperature 
of the water exiting the device.

DHW 35.7°C

The tank temperature, which refers to the current temperature of the 
water in the hot water tank

The main interface icon, indicating that the current page is the main 
interface. Swipe left to enter the ‘Function Settings Interface’; Swipe 
right to enter the ‘Main Status Interface’.

Summary of Contents for KHY-12PY3

















































Reviews: