Kahn Optidew Series, User Manual

Page: 18 / 88

Optidew User’s Manual
Kahn Instruments 9
INSTALLATION
2.3 Electrical Connections
2.3.1 Electrical Supply
WARNING:
The instrument must be GROUNDED
The Optidew accepts a power supply of the following specification:
Voltage 100-240V AC
Frequency 50 – 60Hz
Power Consumption 30VA max
See Appendix A, Technical Specification, for full operating parameters.
Optidew Wall Mount
The wall mount is supplied with a connector wired to a 6 foot cable.
This power connector is wired as follows:
NOTE: The Optidew Wall Mount is designed for continuous operation and therefore does
not feature a power on/off switch. As soon as power is applied, the display (or DCC
button on the transmitter version) will illuminate and the transmitter will initiate a DCC
cycle. Refer to Section 4.4.1.
Replacement power cables are available - contact Kahn Instruments.
Optidew Bench Top
The Optidew Bench Top is supplied with a 6 foot IEC cable. The IEC socket on the side
of the instrument features an integrated ON/OFF switch.
Fuse
This product is provided with an externally mounted fuse located next to the power
connector.