11
SETTING THE TIME & DAY
1� Ensure the Networker is turned OFF using the ON/OFF button (1)�
2� Press Key 5 (18 - Clock) and the screen will display the message
“Clock setting mode”
, and then the Digital
Clock (19) will flash.
3� Use the Rotary Dial (7) to select the right time�
4� Press Key 1 (14 -Day) until the correct day appears e�g� Mon (20)�
5� Press Key 5 (18 - Clock) again to save the changes�
SETTING THE COOLER TO TURN ITSELF ON
1�
Press the PROG button (5) and the display will flash ON TIME and the word PROGRAM.
2� Use the Rotary Dial (7) to set the ON TIME (i�e� the time you want the Cooler to come ON)�
3� You can change the settings the cooler will run at here�
When in Manual mode, use the Rotary Dial (7) to adjust the fan speed and press Key 2 (15) to turn the pump
ON or OFF. When in Auto mode, use the Rotary Dial (7) to adjust the comfort level.
4� Press Key 3 (16 - On Time / Off Time) to activate the Timer�
5�
Press the PROG button (5) to exit and save your setting.
NOTE
The LCD screen (13) displayed On Time (21) to show that an On timer is set. To cancel the Timer
press Key 3 (16).
SETTING THE COOLER TO TURN ITSELF OFF
1� Ensure the cooler is turned ON�
2�
Press the PROG button (5) and the display will flash OFF TIME and the word PROGRAM.
3� Use the Rotary Dial (7) to set the OFF TIME (i�e� the time you want the Cooler to turn OFF)�
4� Press Key 3 (16 - On Time / Off Time) to activate the Timer�
5�
Press the PROG (5) button to exit and save your setting.
NOTE
The LCD screen (13) displayed Off Time (22) to show that an Off timer is set. To cancel the Timer
press Key 3 (16).
CHECKING YOUR TIMER SETTINGS
Once Timer settings are made you can review or cancel them in a number of methods:
The LCD screen (13) displays On Time (21) and or Off Time (22) to show that these timers have been pre-set�
If you want to check what you’ve done
Press the PROG button (5) and the pre-set time will flash. You can now make adjustments to your settings if
required�
If you change your mind and want to cancel the function
Press the Key 3 (16 - On Time / Off Time) and this will cancel the function�
To exit this setting program
Press either the ON/OFF button (1) or the PROG button (5). The Networker remembers the last setting and the
next time you select the Timer it will go to that same setting.
