Kaco 1000335, Manual

Page: 49 / 91

4 1 2 3 4
Change password for
"user"
Password of the
logged-on user | New
password for the
"user" access | Confirm
new password
1 Enter old password.
2 Enter a new, secure password.
3 Confirm and apply new password.
4 1 2 3 4
10 min. mean value
Overvoltage aver-
aging
F Set the voltage via averaging.
Counter / inverter
voltage drop
F
Set the voltage.
4 1 2 3 4
Power Limitation NOTE: The output power of the device can be set permanently to a
lower value than the maximum output power by the internal power
limitation. This may be necessary in order to limit the maximum
power rating of the system at the grid connection point, upon the grid
operator's request.
4 1 2 3 4
Internal NOTE: Opportunity to limit the power internally More detailed inform-
ation at:
Permanent power gradient limitation [See sec-
tion 10.4.1
}
Page 67]
Power Limitation
Status
F Specify the activation status.
4 1 2 3 4
Maximum apparent
power Slim
1000 – S
max
[VA]
NOTE: The max. apparent power limits the internal power of the
device.
F Enter the value or set the value using the slider.
4 1 2 3 4
Maximum active power
Plim
1.0 - 100.0 [% Slim]
Password protection
Status
F Enter the value or set the value using the slider.
4 1 2 3 4
Output gradient limita-
tion increase & Output
gradient limitation de-
crease
1 - 65534 [% / min]
F Specify the increasing and decreasing output gradient.
4 1 2 3 4
EPC (extended power
control) NOTE: EPC settings
Fallback power
0 – 1000 %
Timeout
3 – 100000 s
1 Set fallback power.
2 Set time until shutdown takes place.
3 Apply the values using the Apply button.
Powador 30.0-72.0 TL3
Page 49
EN