har
dw
ar
e k
e
y
kaboodle.com.au
A
A
B
st
ep 2
p.
2
Ver. 2
W-50530
1.
343mm
29
5mm
29
5mm
343mm
133mm
133mm
229mm
229mm
34
1mm
34
1mm
37mm
37mm
235mm
235mm
393mm
393mm
16mm
wood screws
runners
pre-drilling for runners
separating runners
attaching runners
pre-drilling for lid brackets
3.
2.
4.
2 x 11L
side mount pullout bin
A
A
B
On both sides of your cabinet, draw a horizontal line 343mm up
from the bottom. Measuring from the front of the cabinet along
these lines, mark out the pre-drill holes at 133mm, 229mm and
341mm as pictured above. Use a 2mm drill bit to pre-drill holes
to a depth of roughly 2.5mm.
Separate each runner (A) into two parts by extending the guide
(i) and pushing up on the lever (ii) while continuing to pull apart
the two components. The guide should separate easily from the
runner without too much force being applied.
Using the lower sets of pre-drilled holes, align with the
holes on the runners (A) and fix to the cabinet using
6 x 16mm wood screws (B) as pictured above.
On both sides of your cabinet, draw a horizontal line 295mm up
from the bottom. Measuring from the front of the cabinet along
these lines, mark out the pre-drill holes at 37mm, 235mm and
393mm as pictured above. Use a 2mm drill bit to pre-drill holes
to a depth of roughly 2.5mm.
(ii)
(i)
