background image

har

dw

ar

e k

e

y

kaboodle.com.au

A

B

D

C

E

lid brackets

m4 8mm

screws

16mm  

wood screws

bin frame

st

ep 2

p.

 

3

Ver. 2

W-50530

attaching bin frame

inserting bin lid

7.

8.

E

D

Place the bin frame (D) carefully onto the extended runners, 
aligning the holes and then securing into place with the 4 x M4 
8mm screws (E). 

Note:

 

Support the runners from underneath 

when screwing the frame into place. Do not tighten screws.

reassembling runners

attaching lid brackets

5.

6.

B

C

Using the top sets of pre-drilled holes, align with the 2nd, 5th 
and 7th holes on the lid brackets (C) and fix to the cabinet using 
6 x 16mm wood screws (B) as pictured above. 

2 x 11L

 side mount pullout bin 

Carefully slide the guide back into the runner. The runners 
should open and close smoothly if assembled correctly. 
Extend the runners once they have been correctly reassembled. 

Slide the back plastic catches of the bin lid along the top of the 
lid brackets until both plastic catches fall into the channels at 
the back. The front two plastic catches should fit into the front 
channels at the same time. 

Summary of Contents for 2x11L Side Mount Pullout Bin






Reviews: