Kabola Boiler-CH, User Manual, Page: 5 / 27

5
2
Safety
This section includes a summary of points from the manual concerning safety for the procedures you
will follow.
2.1 General safety
Warning:
Kabola Heating Systems designs and builds its products according to the
current best available techniques. However, it is possible that dangers may
occur that can result in injuries or damage to the boilers if the safety
instructions are not followed.
The user must:
 Have read and understood the ‘Safety’ section;

Not carry out any activities that may endanger health;

Not carry out any activities that may cause damage to the boiler;

Ensure that the boiler is only used when it is in a technically good condition and has been installed
in the correct way;

Ensure that the safety measures are complied with during use of the boiler.
Note:
No changes may be made to the boilers without the explicit written
permission of Kabola Heating Systems!
2.2 Safety instructions
The safety instructions specified below must be followed when using the he COMPACT 7 boiler.
MEASURES FOR SAFE INSTALLATION

Do not place any flammable and/or gaseous substances that may cause danger of explosion or fire
in the space where the boiler is or is to be installed.

Install the boiler in a moisture-free space on a strong, horizontal surface.

Fasten the boiler with the assembly bolts (M5) supplied for that purpose.

Ensure sufficient ventilation in the space where the boiler is installed (see § 4.1.1).

Provide an earthed wall socket (230 V AC) for the connection of the boiler.

Before you start connecting make sure there is no voltage on the system.

For the electrical connections and thermostat connections only use multi-core cables with flexible
core (minimum 0.75 mm2).
MEASURES FOR SAFE USE

Never change the burner settings on your own initiative.

When cleaning the boiler do not use any aggressive cleaning products that may corrode the boiler.

Have the boiler settings checked each year by a specialist installer.

Before you start working on the boiler make sure there is no voltage on the system.

Collect any oil that may be released.

It is recommended to only have maintenance and repair activities carried out by specialist and
Kabola-certified persons.