Kabola Boiler-CH, User Manual, Page: 10 / 27

10
VERTICAL OUTLET
This discharge method is the preferred choice for seagoing
vessels and yachts. This is because these vessels can be at
large inclinations caused by waves and can list. For this
discharge method the following points are important:

Fit a rain-proof cowl on the end of the pipe (see fig 5).

Use deck holes to bring the flue duct through the deck and
the ceiling.

Keep the flue gas outlet as vertical as possible.

Use no more than 3 bends of 90 °.

Fit a drain piece.

The maximum permitted length with a vertical system is 5
meters.

With a vertical outlet always use a drain!
Figure 5
Tip:
Kabola can manufacture a deck hole at an angle so the flue is straight as custom work.
FLUE GAS MATERIALS
Kabola can supply all flue gas materials to simplify installation such as:

Stainless steel cowls;

Flexible stainless steel flue gas hose;

Stainless steel discharge pipes (from diameter 70 mm);

Stainless steel deck holes for ceiling and deck;

Stainless steel flue gas dampers;

Drain pieces;

Hose clips;

Stainless steel adaptors;

Skin fittings;

Insulation sleeves (per meter)
Always install a drain with tap directly on the boiler
(See Figure 5.a)
Figure 5.a