9
E.
HARDWARE ASSEMBLY
E-1
Re-install Adams-Rite dead latch assembly.
Re-install Adams-Rite cam plug or plugs
(Do not tighten cylinder set screw)
(See
Figure 9)
.
E-2
Locate the drive assembly on lock side of
door over the pins on the Adams-Rite cam
plug. Secure lower portion of drive assembly
using two threaded sex bolts, two mounting
bushings and two 10-24 thd. X 1
3
⁄
4
"
mounting screws
(See Figure 10)
. Tighten
the cylinder set screw. Make sure the drive
moves freely up and down when holding
Adams-Rite latch depressed. Drive should
return freely to original position without the
help of the Adams-Rite latch spring.
FIGURE 10
Housing
Locator
Stud
Adams-Rite
Dead Latch
Assembly
Adams-Rite
Face Plate
Adams-Rite
Cam Plug
Pins
#74xxx
Drive Assembly
(Sample
Illustration)
Mounting
Bushings (2)
Mounting Screws (2)
As shown on each Drive Assembly
•
31
⁄
32
" B.S.—L.H. Drive
Assembly Part #74422
•
31
⁄
32
" B.S.—R.H. Drive
Assembly Part #74420
• 1
1
⁄
8
" B.S.—L.H. Drive
Assembly Part #74418
• 1
1
⁄
8
" B.S.—R.H. Drive
Assembly Part #74416
Cylinder
Set Screw
Threaded
Sex Nuts (2)
Combination Lock Side
Combination Lock Side
Note
: For
31
⁄
32
" backset, a cam plug cover is
provided for covering the partially exposed
cylinder hole in the stile. Place cover over
cam plug pins before assembling drive
assembly.
FIGURE 9
Narrow
Stile
Adams-Rite
Dead Latch
Assembly
Adams-Rite Face Plate
Adams-Rite
Cam Plug in
Cylinder Hole
Part #4580
Adams-Rite
Cam Plug
Part #4580
(Backside)
Mortise
Cylinder
Cylinder
Set Screw
