Kaba E-Plex 5200 User Manual Download

Page: 102 / 128

Using the E-Plex Advanced ACS Software

3–66

PKG 3114 0106

E-Plex Advanced ACS User’s Guide

Printing User Cards

Complete the following steps to print user cards:

1. From

the

Users Report

window, click

Print Cards

. The software displays the

Print

window:

2. Click

. The software sends the report to the printer and confirms that the report is

complete:

3. Click

again. The software displays the

Users Report

window.

4. Click

Close

. The software returns to the

Reports Menu

window.

List Operators Report

The Operators report displays all Operators who have been defined in the E-Plex Advanced
ACS software.

From this window, you can print and save the Operators report.

Summary of Contents for E-Plex 5200

































































































































Search results

Summary of Contents for E-Plex 5200

Reviews:

Related manuals for E-Plex 5200

Brands by name

Popular brands

Kaba E-Plex 5200, User Manual

Search results

Summary of Contents for E-Plex 5200

Reviews:

Related manuals for E-Plex 5200

Brands by name

Popular brands