1
I
NTRODUCTION
The combination door unit can be added to the X-09 lock to form the CDX-09. This
adaptation allows you to have access control on any door.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO
INSTALL AND OPERATE YOUR CDX-09 LOCK ASSEMBLY.
CDX-09 O
PERATING
I
NSTRUCTIONS
Please read all instructions carefully before attempting to operate your CDX-09
Lock Assembly.
The specifi c instructions for operating the X-09 Combination Lock itself are found in
the “Operating Instructions” booklet for the X-09 Type 1F Lock (P/N 520.021) which
is enclosed in this Operating/Installation Instruction Kit.
Please refer also to the Model CDX-09 Lock System drawing (P/N 524.021) for lock
nomenclature which is also included in this kit.
TO OPEN THE CDX-09 FROM THE OUTSIDE
1. Dial the combination per the instructions in the X-09 “Operating
Instructions” booklet.
2. Turn the dial to the right (clockwise) to withdraw the lock bolt and pull the dead
bolt (Extension Bolt) with it.
Note:
When closing the CDX-09, the dead bolt will not extend until the release bolt
hits the door strike as the door closes.
Life Safety Switch
Serial Number
Label
Lock On Back Cover Pin
Release Knob
Dead Bolt
Release Bolt
