Step 2. Driving position
The scooter has the Kick and Start / ZERO Start
(also called "step"), you must put one foot on the
scooter and the other on the ground then push
with the foot which is on the ground to launch
the scooter and the acceleration. Slowly press
the accelerator.
When the scooter is launched, please put both
feet on the deck. The more you press the
accelerator, the faster it goes.
Deceleration or stopping can be done by
squeezing the brakes on the handle.
How to start
When you turn on the product, you can start
driving by first turning on the main power switch
(when using the built-in battery) and turning on
the power of the LCD panel. When finished
driving, turn off the LCD screen and turn off the
main power.
* Dashboard power will automatically turn off
after a few minutes of inactivity. At this time, the
LED lamp is also off, so turn it off with the LED
lamp button when you turn it on again, and turn
off the main power switch after use.
Step 1. Turn on the main switch
Step 3. Acceleration and deceleration
After tilting the crutch, find a stable position
on the footrest, then hold the handle
comfortably. Be careful not to put your foot
on the rear fender.
Attention
Before riding, be sure to check that all parts of the product are securely fastened.
How to stop
Be sure to use the rear brake first to decelerate when stopping while driving.
You can use the front and rear brake levers together to come to a smooth and safe
stop after decelerating with the rear brake.
Adjust the use and force of the electronic brake from the detailed functions of the
dashboard before driving.
Tip: Check for safe braking
For safe braking, check whether the brake lever and disc caliper connection
(damaged wire, external breakage, etc.) are damaged before and after riding, and
check the brake wear and looseness brake inner core (inner wire).
The electronic braking and ABS functions are auxiliary functions to further
increase the braking force and used.
USER MANUAL - EN 59
58 USER MANUAL - EN
