K40 1000, Installation Instructions

Page: 1 / 4

Installation Instructions
Installation Instructions
& R e c o m m e n d e d P r o c e d u r e s
WARNING & BI-COLOR LED(S)
(MODELS: K40-2000/1000)
1. Consult with vehicle owner about LED location. For best visibility, choose a mounting location as close to the vehicle
gauges as possible.
2. Check for proper clearance behind the area where the LED(s) will be installed (approximately 1”) and drill a 3/16” hole
in the chosen location for the LED(s). K40-2000 models require the mounting of a second LED for rear radar warnings
(see diagram A1).
3. If using the optional bi-color city/highway LED, choose a mounting location in the dashboard area that is below the
driver's line of sight.
4. Check for proper clearance behind the area (approximately 1”), and drill a 19/64” hole for the bi-color LED location.
Insert the LED into the drilled location and fasten it in place with the provided barrel fastener (see diagram A2).
5. Route all LED wires under the dash per diagram A3, and connect according to the separately enclosed block
wiring diagram.
DIAGRAM A1
2 0 0 0 / 1 0 0 0 M O D E L S
1"
1"
DIAGRAM A2
RED ALERT LED
BI-COLOR LED
BARREL
FASTENER
FRONT
ALERT
REAR
ALERT
WHITE/COPPER
L.E.D. WIRES
BLACK/SILVER
L.E.D. WIRES
WHITE/SILVER
L.E.D. WIRES
BI-COLOR
L.E.D.
GRA
Y/COPPER
GRA
Y
/SIL
VER
BLACK
BLACK/COPPER
L.E.D. WIRES
PIEZO SPEAKERS
(MODELS: K40-2000/1000)
1. Use the provided double stick "O" ring tape to mount the piezo
speakers.
2. For maximum audio output and concealment, mount the front
piezo speaker in the driver's left air vent. Mount the rear piezo
speaker in the driver's right air vent.
3. Route the piezo speaker zip cord wires through or under the dash
and connect according to the separately enclosed block wiring
diagram (see diagram B1).
DIAGRAM A3
DIAGRAM B1
FRONT PIEZO
SPEAKER
REAR PIEZO
SPEAKER
LEFT AIR
VENT
RIGHT AIR
VENT
CLEAR/COPPER
WIRES
CLEAR/SILVER
WIRES
BROWN/SIL
VER
WIRES
BROWN/COPPER
WIRES