For Professional Technical Support call 1-844-242-2475 9
cords, clogged impeller, very low head or lift, or a plugged or frozen discharge pipe, etc., could cause cycling.
3. Pump will not remove all water. If operating a pump manually and suddenly no water comes out of the
discharge hose, shut off the unit immediately. The unit has broken prime due to a very low water level.
Risk of electric shock
. Can shock, burn or kill. Before attempting to check why unit has stopped
operating, disconnect power from unit.
SPECIFICATIONS
• Water-cooled, high-efficiency motor for extended operation during power outages.
• Use a deep-cycle marine battery for maximum performance.
• High-quality surface finish and corrosion-resistant thermoplastic structure for long life with minimum
maintenance.
• Reliable reed-sensor water detection for automatic operation.
• Includes controller, charger, float switch, pump, and battery box.
• Easy installation without any major plumbing changes.
CARE AND MAINTENANCE
To prevent serious injury from accidental operation, unplug the pump from its electrical outlet before performing
any inspection, maintenance, or cleaning procedures. To prevent serious injury from pump failure, do not use
damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
BATTERY MAINTENANCE
To protect the battery case from chipping and gouging, do not let the battery sit on a concrete floor. Install the
battery on a shelf or protective pad such as plywood. Always install the battery in a dry location that is protected
from flooding.
Follow the battery manufacturer’s recommendations for maintenance and safe use of the battery.
