6
For Professional Technical Support call 1-844-242-2475
NOTICE
: Remove all sand, clay, and gravel before installing.
5. Install the outlet pipe on the quick connector.
NOTICE
: The quick connector must be tightened.
6. Place Combo Kit into sump pit. Make sure vertical float switches can operate freely inside sump pit, once the
Combo Kit is firmly seated in the base of the pit, then connect the pump outlet pipe to the top outlet pipe with a
hose clamp assembly.
7.
Secure power cord around pipe with a cable tie. Plug the primary pump into a standard household 15 amp
outlet.
NOTICE
: The circuit should be dedicated to the sump pump exclusively.
Remember: Do not handle the pump while it is plugged in; whether it is running or not.
