K-Mate BTE010, User Manual

Page: 6 / 8

5. LED indicator
1) While it is charging
LED indicator Status of the headset
Red LED is on Charging in progress
Blue LED is on Charging finished
2) While it is not charging
LED indicator Status of the headset
Red and blue LEDs flash
alternately
Pairing mode
Blue LED flashes once
every 2 seconds Standby mode (not connect to a
Bluetooth device)
Blue LED flashes twice
every 5 seconds
Standby mode (connected to a
Bluetooth device)
Blue LED flashes quickly Incoming call/calling
Blue LED gradually turns on
and off Conversation mode
Red LED flashes Low power
6. Indication tone
Indication tone Status of the headset
Two continuous DU
tones every 10 seconds
Microphone mute
A string of indication tones
every 30 seconds
Low power
Care and maintenance
Read the following recommendations before using BTE010. Following
these you will be able to enjoy our product for many years.
Keep it dry and don’t take it to damp places to avoid the product’s internal
circuit being affected.
Keep the product away from direct sunlight or hot places. High
temperatures will shorten the life of electronic devices, destroy the
battery or distort certain plastic parts.
Don’t expose the product to cold areas. It may damage the internal circuit
board.
Don’t try to disassemble the product as it may get damaged if you are not
professional.
Don’t let it fall down onto the floor or other hard surfaces. The internal
circuit might get damaged.