K-Mate BTE010, User Manual

Page: 5 / 8

3. Wearing BTE010
The headset is suitable for both ears, because you can freely turn the ear hook.
After putting on the headset, align the microphone towards the user’s mouth to
get the best conversation quality.
4. Making calls with BTE010
Function Operation Indication tone
Voice dial
Press and hold MFB button
for 2 seconds
Two short tones
Redial last number Double click
MFB button
One short tone
Cancel calling Short press MFB button One short tone
Volume up Short press VOL + button One short tone
Volume down Short press
VOL–
button One short tone
End call Short press MFB button One short tone
Answer call
Short press MFB button
One short tone
Reject call
Press and hold MFB button
for about 2 seconds
One long “DU” tone
and then two falling
tones
Call transfer (from
headset to cell
phone)
Press and hold
VOL+
button
for about 2 seconds
One short tone
Call transfer (from
cell phone to
headset)
Press and hold VOL+ button
for about 2 seconds
One short tone
Microphone mute
Short press VOL+ button and
VOL- button simultaneously
Two rising tones
Cancel mute
Short press VOL+ button and
VOL-
button simultaneously
Two falling tones
Re-connect Short press MFB button Two long “DI” tones
Warning: Don’t turn up the headset’s volume too much as this may cause
hearing loss.
Remarks:
Not all cell phones support all functions listed above. Please refer to your
cell phone’s user’s manual for further information.
When the volume is adjusted to max. you will hear a rising “DU” tone;
when the volume is adjusted to Min. you will hear a falling “DU” tone.
When pressing the answer button on some cell phones, the call will be
transferred to the cell phone. You have to transfer the call to BTE004
manually then. Please refer to your cell phone’s user’s manual for further.
Please be advised to switch off your cell phone’s Bluetooth function if you
are not going to make a call with BTE010 in anytime soon.