K.M.E. VSS 15, User Manual

Page: 5 / 28

The control panel
1. 2. 3. 4. 5. 5.
← →
MUTE MENU
↑
Select Preset
Press 2s OK for LOCK
Pr 1 Versio SD3
TOP A
TOP B
Operation
1. System Volume (the “Level Control Mode” is pre-set in factory presets, see page 15) and
volume control for the internal loudspeaker (adjustable from -
∞ to +6 dB)
2. Multicolour LED signalizing different parameters:
LED does not light up - there is no input signal
LED lights up green - there is an input signal
LED lights up blue
- the adjusted user threshold value is exceeded
LED lights up yellow - max. input level, the limiter is working
LED lights up red
- there is a malfunction, you must power cycle the VSS 15
3. The LCD display is used as operation mode display of the VSS 15. The arrows in the LCD
display show the directions to navigate through the submenus (see navigation structure). All
software parameters must be set on the unit itself. Press the ‘OK’ button to select a parameter if
you are asked by the unit.
4. Navigation pad - The navigation pad is to be used for accessing and changing parameters on
the display of the hardware unit. Press the OK button if you are asked by the software (see
navigation structure).
5. Volume control for each output channel (adjustable from - ∞ to +6 dB)