background image

 

 

VERSIO SD 5   (use preset no. 3) 

 

 

   

audio input 

audio input 

  channel A

   speaker          

   output A
  (top unit)
channel A

 

speaker          
output B
(bass)
channel A

speaker          
output B
(bass)
channel B

  speaker          

   output A
  (top unit)
channel B

 

 

 of SD 5

o each top unit,  

     from speaker outputs “Out B” into each bass 

 

            

 

 
 
 
 

Note! 

Please note specific and useful set-up of a first-class loudspeaker system. A universal 
statement about the correct (standard)-adjustment and set-up of PA systems is 
impossible, because each reinforcement is bound to a different place and has always 
different features.  
When using high stands or distance rods for top parts the user has to guarantee the 
stability. Please use just certified mounting material when installing the systems to 
guarantee the safety. Depending on the features of the area/room to be reinforced the 
top unit(s) can also be swiveled a bit horizontally and tilted vertically to reduce reflections 
(on walls + ceilings) and interferences and therefore achieving a better utilization of the 
sound energy.  
The set-up of the PA is followed by the cabeling of the power supply and the audio signal 
in this order:   
  1. Set-up power supply.* 
  2. Plug the XLR-cables (audio signal channel A+B) in the VSS 15.   

3. When switching o the system please mind that all volume potentiometers are turned  
fully anti-clockwise / left stop (to avoid an unwanted sound reproduction) and that all 

could start in the „lock

cti “ (if sav

 set 

to 0 dB which could cause an immediate reproduction.  

he power supply connection of the PA systems (SD 3 / SD 4 / SD 5) is always made by 

used electric circuit. Please mind that it is not coming to 

d loop during cabeling of the system. If it comes to deep-frequent hum switch the 

-Free to „Free“. Always use balanced signal cables if possible. Do not mask or 

detach the conducter connection on the mains plug! 

Danger!

  

channel B

 

: from speaker outputs “Out A” int

scheme of the power-output connection
 

 

 

 

 

connected components are switched on and muted previously because the VSS 15 

-fun on

ed previously) and for example the volume is

*T
the supplied IEC plug on a 16A f
a groun
Ground

Summary of Contents for VSS 15





























Reviews: