K.M.E. VSS 15, User Manual

Page: 4 / 28

The connection panel
1. 2. 3. 4. 6. 6. 5.
Power
1. GROUND/FREE switch (disconnects the ground of the input channels from chassis to avoid
ground loops)
2. Mains socket with integrated fuse holder (replace fuse only by type 10A slow blowing fuse
5x20 mm),
Attention:
use only the correct mains voltage 230 V AC (conforming to standard
IEC 60320-C14).
3. Power switch,
Attention:
please turn down all volume controls before switching on the VSS 15
to avoid an undesirable sound reproduction.
Connections
4. Line in & link out - XLR balanced, analogue/digital switchable (see navigation structure);
link out is only active when the VSS 15 is powered on
5. Line in & link out - XLR balanced, always analogue;
link out is only active when the VSS 15 is powered on
6. Speaker output - 2x Speakon NL 4 (2x 500 W @ 4 Ohm (min. impedance), depending on
preset),
Attention:
Please mind nominal load and impedance of the passive loudspeaker(s) you
connect.