K.M.E. VSS 15, User Manual

Page: 16 / 28

hoose your factory preset - play!
this part of the user manual you will find a structured digest about the procedure for the
its functions. If you pay attention to that a
D 3 / SD 4 /SD 5 (see page 23) you must choose
e valid preset(s) for your current setup in the system menu in the VSS 15.
witch on the VSS 15 when all volume pots are are turned fully anti-clockwise / left stop
nd all connected components are switched on and muted previously to avoid an
reproduction.
n when switching it on. Therefore it is necessary to mute
)
o control the respective system optimally the valid preset has to be load. You must
elect it and load your latest PA-setup as preset on the control panel of the VSS 15.
(e.g. select SD 5)!
C
In
necessary settings with the main menu and
iskless use of the VSS 15 is ensured. r
After building up the your PA system S
th
Powering up
S
a
unwanted sound
Because the VSS 15 can be in „lock-function“ for rental purposes that means the VSS 15
may not (depending on adjustment) react on changes on the control panel and this can
cause an immediate reproductio
all connected devices previously.
After switching on the VSS 15 all volume pots should be turned to 0 dB (center click) with
deactivated „lock-function“ to keep a defined signal level and an optimal controlling (this
demand is just a recommendation
Note! During power on for the very first time Preset 1 „VERSIO SD 3“ is loaded! More
information about the initial state you can find on page 3.
Choosing presets
T
s
Follow the instructions
2x
After power on the VSS 15 for the very first time the left graphic appears on the LCD display. You
have to press the marked arrow key of the navigation pad two times to select preset 3 „VERSIO
SD5“ and confirm with the OK-key. In this case this procedure has to be done once again on the
second VSS 15 of the SD5.
If you control your PA system with an analogue audio signal,
you can start now!