When should I choose which preset?
To adapt the VL 750 / VL 760 to your reinforcement, you have to choose and load the
correct preset of your setup. In this list you can read out the application of the presets.
Choose: preset 01 – to use the VL 750 / VL 760 as top unit in the PA system SD7 / SD8
reset 02 – to use the VL 750 / VL 760 as full-range without additional sub
p
preset 03 – to use the VL 750 / VL 760 as linear system
preset 04 – to use the VL 750 / VL 760 as monitor
preset 05 – to use the VL 750 / VL 760 as free configurable delay line
preset 06 – to use the VL 750 / VL 760 as free configurable full-range system
preset 07 – to use the VL 750 / VL 760 as free configurable monitor
preset 08 – to use the VL 750 / VL 760 as free configurable top unit
6.3 Selecting presets
To control the respective system optimally the valid preset has to be load. You have to
select it and load your latest PA-setup as preset on the control panel of the VL 750 /
VL 760. Follow the instructions (e.g. select „VL750 Mon“)!
Press to
re-
←
Mute active
activate system!
2x
After power on the VL 750 / VL 760 for the very first time the left graphic appears on the LCD
display (depending on VL 750 or VL 760). You have to press the marked arrow key of the
navigation pad twice to select preset 4 „VL750 Mon“ and confirm with the OK-key.
If you control your PA system with an analogue audio signal,
you can start now!
Summary of Contents for VERSIO VL 750
Page 1: ...User Manual VL 750 VL 760 ...
Page 27: ......
