JYTEK Thunderbolt PXIe-62314T, Manual

Page: 47 / 51

Maintenance 37
A.4 Maintenance
A.4.1 Handling the Chassis
The PXIe-62314T is designed for bench top use. When transport-
ing or carrying the chassis, it is recommended that the handle be
used, being designed to support the weight of the chassis for
superior portability and balance.
The
PXIe-62314T weights 3.6 kg (7.9 pounds). Please be careful
when moving the chassis to avoid any possible injury.
A.4.2 Cleaning the Exterior
Make sure that the system is turned off before cleaning the chas-
sis exterior. Wipe the exterior with a clean cloth starting from areas
that easily accumulate dust or dirt such as the area in and around
the chassis air intake apertures.
A.4.3 Power Requirements
Make sure that the power cord and DC power input connector are
in good condition before plugging it into the system. It is important
to check the reliability of the power source. The PXIe-62314T
power supply is capable of delivering 9 to 32V DC. Do not connect
the PXIe-62314T to an already overloaded circuit.
Temperature LED
(amber) is blinking

Airflow from the outlet apertures
is unobstructed and steady; if not,
ensure that adequate clearance
for the intake apertures is pro-
vided

Over threshold event of tempera-
ture is triggered.
If the temperature of exhausted air is normal (70°C
is the default threshold setting) but the temperature
LED is still blinking, contact your dealer for further
assistance.
Problem Ensure that: