26
Getting Started
2.5.1
Operation - Power on sequence
1.
Connect the
PXIe-62314T
to a host PC/notebook using a
Thunderbolt 3 cable (the
PXIe-62314T
60W port sup-
ports USB Power Delivery for charging).
2.
Connect Thunderbolt 3 peripheral devices to the other
port of the
PXIe-62314T
if required.
3.
Connect the AC-DC power adapter.
4.
Power on the
PXIe-62314T
by pressing the power button
on the front panel.
5.
Power on the host PC/notebook and boot into Windows 10.
6.
Launch Thunderbolt utility of host PC/notebook. Set
PXIe-62314T
as a valid device to always connect.
NOTE:
NOTE:
In order to make sure essential system and OS resource are
reserved for Thunderbolt controllers, the
PXIe-62314T
must
be the first device connected to the Thunderbolt 3 port of the
host PC.
Do not hot swap, replace, disconnect or connect any
components (including cards and cabling) on chassis
while the system is powered up. Doing so may result in
system damage and/or data loss, and physical injury
(due to possible shock hazard).
Summary of Contents for Thunderbolt PXIe-62314T
