JYTEK Thunderbolt PXIe-62314T, Manual

Page: 43 / 51

Maintenance 33
Appendix A - Maintenance
This Appendix describes basic maintenance and troubleshooting
instructions for the PXIe-62314T chassis.
A.1 Installation Problems
Inability to start the system frequently results from incorrect instal-
lation of the peripheral modules, and other components. Before
starting the system, please ensure that:

The host PC/notebook is properly connected via a certifi-
cated Thunderbolt 3 cable.

All peripheral modules are properly seated on the slots.

All cables are properly connected to the system controller
and peripheral modules.

All installed peripheral modules are compatible for use in
the chassis.

The power cord is securely plugged into the chassis power
connector and power outlet/wall socket/power strip.
If the system fails to start when all installation conditions are met,
remove all installed peripheral modules and try again. If the sys-
tem starts normally, install one peripheral module at a time fol-
lowed by powering up. You may also try installing the modules into
different slots until the desired result is obtained.
A.2 FAQ
Q: What devices are required for setting up a completed PXI
Express system using the PXIe-62314T ?
A:•A PC or notebook (minimum one Thunderbolt 3 port and Win-
dows 10).
•A PXIe-62314T with peripheral modules required for desired
application.
•A DC input connector (in-box accessory, DECA
MC311#50803).
•A certificated Thunderbolt 3 cable (kit accessory, Type-C).
•An AC-DC power adapter or DC power source (kit acces-
sory). 24V DC, 160W recommended.