6
2 Getting Started
This chapter describes procedures for installing the PXIe-63975 and making preparations
for its operation, including hardware and software setup. Please note that the PXIe-63975
is shipped with RAM and HDD pre-installed. Please contact JYTEK if there are any problems
during the installation.
Diagrams and illustrated equipment are for reference only.
Actual system configuration and specifications may vary.
2�1 Package Contents
Before beginning, check the package contents for any damage and ensure that the following
items are included:
• PXIe-63975 Controller (equipped with RAM and HDD)
• DVI-to-VGA adapter
• JYTEK All-In-One USB Flash Driver
If any of these items are missing or damaged, contact JYTEK or the dealer from whom you
purchased the product. Save the shipping materials and carton in case you want to ship or
store the product in the future.
Do not install or apply power to equipment that is damaged or missing
components. Retain the shipping carton and packing materials for inspection.
Please contact your JYTEK immediately for assistance and obtain authorization
before returning any product.
2.2 Operating System Installation
For more detailed information about the operating system, refer to the documentation
provided by the operating system manufacturer. Preferred/supported operating systems
for PXIe-63975 are:
• Windows XP
• Windows 7 32/64bits
• For other OS support, please contact JYTEK
Most operating systems require initial installation from a hard drive, floppy drive, or CD-
ROM drive. The PXIe-63975 controller supports USB CD-ROM drive, USB flash disk, USB
external hard drive, or a USB floppy drive as the first boot device. Please see Section
4.5: Boot Setup for information about setting the boot devices. These devices should be
configured, installed, and tested with the supplied drivers before attempting to load the
new operating system.
Read the release notes and installation documentation provided by the operating
system vendor. Be sure to read all the README files or documents provided on the
distribution disks, as these typically note documentation discrepancies or
compatibility problems.
1 Select the appropriate boot device order from the BIOS Boot Setup Menu based on
