jWIN JD-VD502, User Manual

Page: 4 / 23

A2
FEATURES
Copyrights:
The copyright protected content cannot be copied, broadcast, screened, cablecast,
or played publicly and rented, unless it is authorized.
Do not use cracked or anamorphic discs in the unit, or it might damage the loader.
Do not repair the unit yourself. Opening or removing the cover may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Unplug the unit and refer servicing to qualified service personnel under the
following conditions:
A. When the power cord or plug is damaged or frayed
B. If liquid has been spilled or objects have fallen into the unit
C. The unit has been exposed to rain or water
D. If the unit does not operate normally when following the operating instructions
E. If the unit has fallen or the cabinet has been damaged
F. When the unit exhibits a distinct change in performance – this indicates a need
for service
Tips: Upon completion of any service or repairs, ask the service technician
to perform routine safety checks to determine that the unit is safe to operate.
Remote Control Notice
--
Aim the remote directly at the receiver on the unit while operating it.
--Do not let the remote fall, especially from a high place
--Do not place the remote in a hot or moist location
--Do not let any water or other liquid fall on the remote
--Do not open the remote control, except to changeits batteries
--Do not use the remote control at a distance greater than 7 meters (about 23 feet) from
the unit, nor at an angle which exceeds 30° away from the center of the TV
--Do not expose the infrared receiver on the JD-VD502 (see page B1, item 13) to a
strong light source, such as sunshine or bright lights, or the remote control may not
operate consistently
The
specifications and manual are subject to change without notice.