jWIN JD-VD502, User Manual

Page: 19 / 23

SYSTEM SETUP
Dol b y Digital Steup
Dual Mono
Dynamic
Mic Off Off
ON
Stereo
L-Mono
R-Mono
Mix-Mono
Dual Mono
This option allows you to set the output methods for
the left and right audio signals. There are 4 modes:
stereo,left sound channel, right sound channel, and
mixed sound channel, to be selected according to the
AC-3 K A RAOKE mode.
Dynamic
You can change the zip mode to “Dual Mono” in
order to adjust linear zip ratio and obtain the zip
effects for different signals. If you choose FULL, the
peak value of audio signal is minimum, and becomes
maximum if you choose off.
Br
Component:
S-Video: Choose this setting if your DVD player
is connected to a TV with an S-Video cable or
composite video cables (Yellow/Red/White) .
Tv-Mode:
Interlace-YUV: Choose this setting if your DVD
player is connected to a TV with Y, Cb, Cr video
cables.
P-SCAN: Choose this setting if your DVD player
is connected to a progressive scan TV with Y,
Cb, Cr video cables.
ightness:
Setup this item to control the brightness of
image, available range from 0 to +20.
Hue:
Setup this item to control the hue of image,
available range from 0 to +9.
Contrast:
Setup this item to control the contrast of
image, available range from 6 to +16.
V
Component
TV Mode
ideo Setup Page
Brightness 00 Brightness |||||||||......0
Contrast 00 Contrast |||||||||......0
Sharpness Low
S-video S-video
Yuv
P-Scan
Interlace
High
Medium
Low