AL1 ON
→
AL2 ON
→
AL1 and AL2 ON
→
AL1 and AL2 OFF
* When alarm is turned on and when time is up, it alarms, during alarming, press "SNOOZE/LIGHT" key to
turn on snooze,
,
symbol and corresponding alarm twinkling all the time; press any other key to stop the
alarm and exit the alarm.
* No any key pressed, alarm stops automatically after 2 minutes.
* During alarming, corresponding AL character twinkling on the display.
* Under snooze mode, corresponding AL character and Snooze symbol twinkling display. Press “SNOOZE/
LIGHT” to turn on backlight for 8 seconds, press any other key to stop and exit, at the same the alarm is off.
* When alarm or snooze working, in case of RCC receiving time is out, RCC receiving would be put off until
the alarm or snooze finished.
* If alarm time is same for both AL1 and AL2, only AL1 symbol twinkling on display when time is up.
* when one alarm time or snooze time is out, during alarming, it happens to meet another alarm, then the first
alarm would stop and work out new alarm.
* Snooze could be repeated all the time.
* BUZZER for 2 minutes in alarm format
a. 0-10 second: BI per second
b. 10-20 second: BIBI per second
c. Over 20 seconds : BIBIBIBI per second
* Under normal mode, press “SNOOZE/LIGHT” key for some seconds to enter snooze interval time setting
(optional from 3 minutes to 20 minutes, default:5 minutes)
,
(Snooze Interval Time Setting Display
）
* Setting snooze item twinkling at 1HZ frequency
* Press “UP” key, value go ahead 1 step, press and hold “UP” key for 2 seconds, go ahead at an 8 step/
second speed.
* Press “DOWN” key, value go back 1 step, press and hold “UP” key for 2 seconds, go back at an 8 step/
second speed.
* After setting, press "MODE" to exit.
* No any key press for 10 seconds exit setting status, value keep on.
5. Temperature and Humidity Function
* Out of the indoor and outdoor temperature display, the low end displays “LL”, the high end displays “HH”.
* Under normal mode, press “CHANEL” key to switch outdoor temperature and humidity display, switch in
sequence: CH1 temperature and humidity
→
CH2 temperature and humidity
→
CH3 temperature and
humidity
→
CH1 temperature and humidity (cycle display, symbol
,
appears on the LCD display)
* Under normal mode, press and hold “CHANEL” key for some seconds, clear the outdoor temperature and
humidity, then re-register for 3 minutes.
