XV-NA7SL
10
2.1.7 How to remove LCD display & operation switch
board
(See Figure 11, 12, and 13)
• Please remove a top cover and a front panel assembly before
removing LCD display & operation switch board.
(1) Extract card wire and flat wire from connector CN2, CN3,
and CN8 on LCD display board.
(2) Remove four screws H that attach an operation switch
board, and then operation switch board.
(3) Remove support button, LCD display board, and push but-
ton in this order.
•
When the main part is assembled, parts must be assem-
bled in the following order:
Push button
LCD display board
Side LED board
Support button
Operation switch board.
•
After the operation switch board is attached to its place,
let a card wire through a slit on the operation switch
board, and then insert it in CN2. (See Figure 11.)
Fig.11
Fig.12
Fig.13
