JVC VN-V686WPU, Instructions Manual

Page: 37 / 121

37
A
Reload Still
Image Press this button to refresh the displayed still image.
Clicking [View] or re-entering the Internet Explorer address will only display the
page that is temporarily stored in the Internet Explorer, and still images may not be
refreshed.
To refresh still images using the above operations, change the Internet Explorer
settings as follows.
●
Open [Tool]
-
[Internet Options], click the [Settings] button under Temporary Internet
Files, and select
A
Every visit to the page
B
.
Note
：
●
When a firewall is installed between VN-V686WPU and the computer, still images
may not be displayed on the Image View page of the web browser. For such
systems, check the still images using Built-in Viewer. Built-in Viewer supports NAT/
NAPT.
B
JPEG
Viewer This is displayed upon access to the View page using
A
admin
B
or
A
operator
B
.
Click this button to display screens such as the [Security Settings] screen. Press
the [OK] or [Yes] button to launch Built-in JPEG Viewer.
Do not click on the [JPEG Viewer] button over and over again while leaving the
warning screen unattended.
When this button is pressed for the first time on the operating PC, Built-in JPEG
Viewer will be installed on the computer.
Memo
:
●
Refer to [Built-in Viewer] (
A
Page 91) on procedures to install Built-in Viewer on the
computer and ways to use Built-in Viewer.
C
MPEG4
Viewer This is displayed upon access to the View page using
A
admin
B
or
A
operator
B
.
Click this button to display screens such as the [Security Settings] screen. Press
the [OK] or [Yes] button to launch Built-in MPEG4 Viewer.
Do not click on the [MPEG4 Viewer] button over and over again while leaving the
warning screen unattended.
When this button is pressed for the first time on the operating PC, Built-in MPEG4
Viewer will be installed on the computer.
Memo
:
●
Refer to [Built-in Viewer] (
A
Page 91) on procedures to install Built-in Viewer on the
computer and ways to use Built-in Viewer.