58
3-3 Motion Detection Standby
The "Motion Detection Standby" function enables automatic connection upon
receiving notifications on detected motion from VN-C205 when the V.Networks
Controller has been started up.
1.
Select [File] and [Motion Detection Standby].
2.
Select a camera.
1
Select the camera for which the Motion
Detection Standby function is to be
enabled.
1
Click
.
3.
Click
.
Settings (Step 3 Setting Using the V.Networks Controller)
59
The "V.Networks Controller" can be used to set the size of the motion image window
as well as to invert an image.
1.
Select [View].
2.
Specify [Image Size] and [Upside Down] settings.
3-4 Image Size and Inversion
Click
.
Right-click on the motion image window to
change the settings.
Set the image size.
• VN-C205 does not support the 160 x 120
setting.
When
is checked, a grid for the motion
detection area will appear and the detection
area will be displayed in red.
Displays the MAC address, IP address,
model and firmware version.
Notes
●
Setting to the Fine mode enables
display of image details.
Images of moving objects shot in this
mode may be blurred, but this is not a
malfunction.
●
Fine mode can only be used with the
640 x 480 resolution.
Notes
