Note
0
If the same station is broadcasting on different
frequencies, the strongest frequency will be stored
in memory.
0
Any station which has the same frequency as the
one stored in memory will not be stored.
0
If 40 stations have already been stored in memory,
the scan will be aborted. If you want to redo the Auto
Preset Memory operation, erase the preset
memory.
0
If no station have been stored in memory, “END” will
appear for about 4 seconds.
0
If the Radio Data System signals are very weak,
station names may not be stored in memory.
0
The same station name can be stored in different
channels.
0
In a certain area or during certain time periods, the
station names may temporarily be different.
Notes for Radio Data System
Operation
If any of the following events occur, it does not
mean that the unit is faulty:
0
“PS”, “No PS” and a station name appear
alternately, and the unit may not operate properly.
0
If a particular station is not broadcasting properly or
a station is conducting tests, the Radio Data System
reception function may not work properly.
0
When you receive an Radio Data System station
whose signal is too weak, information like the station
name may not be displayed.
0
“No PS”, “No PTY” or “No RT” will flash for about 5
seconds, and then the frequency will be displayed.
Notes for radio text:
0
The first 14 characters of the radio text will appear
for 4 seconds and then they will scroll across the
display.
0
If you tune in to an Radio Data System station which
is not broadcasting any radio text, “No RT” will be
displayed when you switch to the radio text position.
0
While radio text data is received or when the text
contents change, “RT” will be displayed.
Programme Type (PTY) Search
To specify programmed types and select
stations (PTY search)
You can search a station by specifying the programme
type (news, sports, traffic programme, etc. ... see page
36) from the stations in memory.
1
Press the [TUNER] button on the remote
control or [SOURCE] button repeatedly on
main unit to select “TUNER” function.
2
Press the [PTY](Radio Data System) button
on the remote control.
.
“SELECT” and “PTY TI” will appear alternately for
about 6 seconds.
3
Within 6 seconds, press the [/
PRESET -] button to select the programme
type.
.
Each time the button is pressed, the programme
type will appear. If the button is held down for
more than 0.5 seconds, the programme type will
appear continuously.
4
While the selected programme type is
flashing (within 6 seconds), press the [PTY]
button again.
.
After the selected programme type has been lit
for 2 seconds, “SEARCH” will appear, and the
search operation will start.
35
