No. 51922
TM-H1700G
21
■
DEFLECTION BLOCK
①
In the <BLOCK SELECT> screen, press the
VOLUME/SELECT
–
(DOWN)
key.
②
Then the DEFLECTION BLOCK adjustment screen is displayed (Fig. 14).
The indication service number on the screen are changed by the vertical
frequency, aspect ratio and scan size of signal for adjustment.
③
The original front key function replaced with the other function displayed
at the lower side of the screen as shown below.
■
CONTROL BLOCK
In the CONTROL BLOCK, there are several setting items for decide the
whole system condition. It is no requirement for adjustment in this block.
Please not to change the values. If you had changed the values, you should
put back the values by the method as following.
①
In the <BLOCK SELECT> screen, press the
VOLUME/SELECT
+(UP)
key.
②
Then the CONTROL BLOCK adjustment screen is displayed (Fig. 15).
③
The original front key function replaced with the other function displayed
at the lower side of the screen as shown below.
DEFLECTION BLOCK
* * *
* * *
* * *
* * *
< D01 > :
EXIT
Fig.14
CONTROL BLOCK
* * *
* * *
* * *
* * *
< C01 > :
EXIT
図
図
図
図
15
* * *
* * *
* * *
* * *
< D01 > :
EXIT
Select the service number
Data operate (inc/dec) key
Adjustment mode exit key
<Function Display>
<Front Panel Key Arrangement>
* * *
* * *
* * *
* * *
< C01 > :
EXIT
Select the service number
Data operate (inc/dec) key
Adjustment mode exit key
<Function Display>
<Front Panel Key Arrangement>
