background image

13

PROBLE/TROUBLE

POSSIBLE CAUSE

SOLUTION

Sound quality of audio 

play from a connected 

Bluetooth device is 

poor and connection 

is not stable.

The Bluetooth reception is poor.

Move the device closer to the sound bar, 

or remove any obstacle between the device and 

the sound bar.

The volume on the Bluetooth device may 

be too low.

Raise the volume on the Bluetooth device.

Bluetooth is not selected as the input source.

Select the Bluetooth as the input source.

Playback on the device has not been performed.

Perform playback on the device.

The sound output on the Bluetooth 

device may not be set to this unit.

Select this unit as the output device on 

the Bluetooth device.

The connection to the Bluetooth device 

was cut off.

Connect with the Bluetooth device one more time.

Move the Bluetooth device near this unit.

The unit may be too far away from the 

Bluetooth device.

Do not use this unit near device that emit 

electromagnetic waves.

1. Make sure that the user connected TV and 

sound bar by a 19-core HD ARC cable.

2. The sound bar and TV are connected through 

TV (ARC) port output; make sure that the TV is 

ARC compliant.

3. Set the TV to HDMI ARC (CEC). 

Set the audio output mode of TV to PCM format. 

(Or refer to your TV user manual)

A device emitting electromagnetic waves 

(such as a microwave oven, a wireless 

device and so on) may be placed nearby.

No qualified HDMI TV (ARC) cable is used & 

No signal is input on sound bar & connection 

and operation method is not correct.

No sound can be heard 

or sound breaks 

(Bluetooth mode)

There is no sound from 

sound bar -

HDMI TV (ARC) Mode

1. Try to replace another OPTICAL cable to connect. 

2. Set your TV audio output to PCM format.

(Pls refer to your TV user manual)

OPTICAL cable maybe damaged & No signal 

is input on sound bar & connection and 

operation method is not correct.

There is no sound from 

sound bar 

(OPTICAL Mode)

Make sure that USB flash drive contains MP3 files 

because other file types are not support.

Switch the input mode once again, then 

playback again.

USB file type is not support & Sound bar 

doesn’t switch to USB input mode 

automatically when USB is inserted.  

There is no sound from 

sound bar (USB mode)

Summary of Contents for TH-S320B




















Reviews: