14
Operating the TV and DVD player
NOTE
• Manufacturers’ codes are subject to change without notice.
7
To set the manufacturer’s code
1
Press and hold
TV.
Press and hold the button until step 3 is finished.
2
Press ENTER.
3
Press number buttons (1 - 9, 0) to
enter the manufacturer’s code (2
digits).
Examples:
For an AKAI TV: Press
0
, then
2
.
For a FISHER TV: Press
1
, then
7
.
*
01 is the initial setting.
4
Release TV.
If there is more than one code listed for corresponding
brand, try each one until you enter the correct one.
7
To operate a TV
You can perform the following operations on the TV.
NOTE
• The operating buttons may differ depending on
manufacturers.
You can use the remote control to operate not only this unit but also JVC and other manufacturers’ TV and DVD
player.
• Refer also to the manuals supplied for the TV and DVD player.
• To operate the equipment, aim the remote control directly at the remote sensor on the target equipment.
The buttons described below are used on pages 14 to
15.
Operating the TV
Number
buttons
JVC
01
*
PHILIPS
29
AKAI
02, 17
PIONEER
42
DAEWOO
08, 09, 29
RCA
02, 20, 46,
47, 48, 49
FISHER
17
SAMSUNG
29, 51, 52,
71, 72, 73,
74
HITACHI
24, 26
SANYO
17
IRRADIO
17
SCHNEIDER
17
MAGNAVOX
29
SHARP
54
MARANTZ
30
SONY
55
MITSUBISHI
30
TOSHIBA
53
PANASONIC
39, 41
ZENITH
69, 70
TV
Turn on or off the TV.
TV/VIDEO
Set the input mode (either
TV or VIDEO).
1 - 9, 0, or +100 while
pressing SHIFT
Selects the channels.
RETURN while pressing
SHIFT
Alternates between the
previously selected channel
and the current channel.
TV CH +/– while pressing
SHIFT
Change the channels.
TV /– while
pressing SHIFT
Adjust the volume.
TH-L1[U].book Page 14 Friday, June 1, 2007 9:34 AM