12
Connections
7
To connect the video components for the source of VIDEO 3
• You can get better picture quality in the order — S-video > Composite video.
NOTE
• Unify the way of TV connection and that of video component’s (for example, connect a video component through S-VIDEO jack
when TV is connected through S-VIDEO jack). Otherwise, the signal from the component is not sent to the TV.
• When playback from USB source, scanning mode can be adjusted to have better picture quality. (See page 18.)
• If you connect a sound-enhancing device such as a graphic equalizer between the source components and this system, the sound
output through this system may be distorted.
• When shipped from the factory, the source of “VIDEO 3” have been set for use with the VIDEO 3 AUDIO L/R audio terminal
for the audio connection. If you connect the components with digital optical audio cord, change the audio input (VIDEO 3)
setting to “DIGITAL.” (See page 31.)
Connecting the video components for the source of VIDEO 3
Center unit
Game console or
camcorder
To composite
video output
To S-video
output
Composite video cord
(supplied)
or
S-video cord (not supplied)
Align the
5
marks.
To analog audio output
To digital optical audio
output
RCA pin plug
cord
(not supplied)
Digital optical audio cord
(not supplied)
Do not connect the power cord until all other connections have been made.
TH-L1[U].book Page 12 Friday, June 1, 2007 9:34 AM
