background image

38

 EN

3

ACCESS MAIN MENU

SCREEN

1

Press 

MENU

.

ACCESS VHS MODE SET

SCREEN

2

Move the highlight bar (arrow) to "VHS MODE SET" by
pressing 

CH

5∞

 or

%fi

, then press 

OK

 or 

#

.

SELECT S-VHS MODE

3

Move the highlight bar
(arrow) to "S-VHS MODE"
by pressing 

CH

5∞

 or

%fi

,

then press 

OK

 or 

#

 to set to

"ON" or "OFF".

RETURN TO NORMAL

SCREEN

4

Press 

MENU

.

NOTE:

When playing back a tape that has been recorded in S-VHS or
S-VHS ET, the S-VHS indicator lights on the display panel
regardless of the "S-VHS MODE" setting.

S-VHS (Super VHS), S-VHS

ET and VHS 

(VHS deck only)

Your VCR can record in S-VHS, S-VHS ET or VHS.
S-VHS allows you to make high quality video recordings with a
horizontal resolution of 400 lines. This compares with the 240
lines of resolution of normal VHS recordings. To achieve the
highest quality picture we recommend that you record in S-VHS
mode.
By using S-VHS ET it is possible to record and play back with S-
VHS picture quality on VHS cassettes with this VCR. For details,
refer to page 39.

To record in S-VHS;

perform the steps 

1 – 4

 below to set the "S-VHS MODE" to

"ON".

then, insert a cassette marked "S-VHS", the S-VHS indicator
will light on the display panel.

The S-VHS recording mode will be automatically selected.

To record in S-VHS ET on a VHS high grade cassette;

press 

S-VHS ET

 and set to "ON".

Z

 "Super VHS ET" on page 39.

To record in VHS;

insert a cassette marked "VHS".

press 

S-VHS ET

 and set to "OFF".

The VHS recording mode will be automatically selected
regardless of the S-VHS mode setting.

To record in VHS on an S-VHS cassette;

insert the cassette marked "S-VHS", the S-VHS indicator will
light on the display panel.

then, perform the steps 

1 – 4

 below to set the "S-VHS MODE"

to "OFF"; the S-VHS indicator will go out.

The VHS recording mode will be selected.

NOTE:

Tapes recorded in S-VHS or S-VHS ET mode can not be played
back successfully on normal VHS VCRs.

CH

MENU

OK

VHS MODE SET

S-VHS ET

OFF

=

S-VHS MODE

ON

VIDEO CALIBRATION

ON

PICTURE CONTROL

AUTO

DIGITAL TBC/NR

ON

VIDEO STABILIZER

OFF

NEXT PAGE

 SELECT WITH (

5

,

) AND (OK)

 PRESS (MENU) TO END

PLAYBACK AND RECORDING FEATURES (cont.)

Summary of Contents for SR-VS10U - Dual Format Mini-dv/s-vhs Recorder

















































































Reviews: