JVC SR-MV30US Instruction Manual Download

Page: 6 / 96

Filename [SR-MV30U_02Safety.fm]

Masterpage:Left0

Page 6

March 30, 2004 5:46 pm

This unit allows you various types of playback and recording because this unit has two tuners.

Record programs on both DVD deck and VCR deck simultaneously

Start recording on the DVD deck. (

墌

pg. 38)

Start recording on the VCR deck. (

墌

pg. 50)

NOTE:

DV IN connector is available for DVD deck only.

Watch another program while recording on the unit

Pressing

VCR/DVD

switches to the other tuner.

Start recording on the DVD deck or VCR deck. (

墌

pg. 38, 50)

Press

VCR/DVD

Press

CH +/–

to select the desired channel.

Operate the VCR deck while recording on the DVD deck

Pressing

VCR/DVD

switch to the other tuner.

Start recording on the DVD deck. (

墌

pg. 38)

Press

VCR/DVD

Operate the VCR deck.

Operate the DVD deck while recording on the VCR deck

Start recording on the VCR deck. (

墌

pg. 50)

Press

VCR/DVD

Operate the DVD deck.

Operate the VCR deck while the DVD deck is in timer standby
mode

Engage the DVD deck’s timer mode. (

墌

pg. 41)

●

The VCR deck is automatically selected and the VCR lamp lights up
on the unit.

Operate the VCR deck.

Operate the DVD deck while the VCR deck is in timer standby
mode

Engage the VCR deck’s timer mode. (

墌

pg. 52)

●

The DVD deck is automatically selected and the DVD lamp lights up
on the unit.

Operate the DVD deck.

Features of this unit

Recording

Another program

Playback, recording, etc.

Recording

Playback, recording, etc.

Timer standby mode

Playback, recording, etc.

SR-MV30U_00.book Page 6 Tuesday, March 30, 2004 5:46 PM

Summary of Contents for SR-MV30US

































































































Search results

Summary of Contents for SR-MV30US

Reviews:

Related manuals for SR-MV30US

Brands by name

Popular brands

JVC SR-MV30US, Instruction Manual

Search results

Summary of Contents for SR-MV30US

Reviews:

Related manuals for SR-MV30US

Brands by name

Popular brands