Masterpage:Right+
EN
39
Filename [SR-MV30U_06DVD Operation2.fm]
Page 39
March 30, 2004 5:46 pm
OPERATIONS ON DVD DECK
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the unit off after
recording is finished.
1
Press
7
on the unit to start recording.
2
Press
7
again to engage the ITR mode.
●
On the front display panel, “0:30” appears.
3
If you want to record for more than 30 minutes, press
7
to
extend the time. Each press extends recording time by 30 minutes.
NOTES:
●
You can only perform ITR using the
7
button on the unit.
●
When the recording capacity becomes full during timer recording or
Instant Timer Recording, the unit is automatically shut off.
Watch Another Program While Recording On The Unit
While recording is going on, you can watch another program on the
TV by using the TV’s tuner.
NOTE:
It is required that the remote control is set to be able to operate the TV
in advance. (
墌
pg. 70)
1
During recording, press
TV/VCR
to select TV mode if your unit
is connected to the TV via the RF connection.
●
VCR mode is disengaged, then the VCR indicator lights off and “TV”
appears on the front display panel.
●
The program received on the TV’s tuner is displayed on the TV
screen.
2
Slide the
TV/CABLE/DBS/DVD
switch to
TV
.
3
Press
CH +/–
repeatedly to select the desired channel.
Elapsed Recording Time And Disc Remaining Time
Indication
During recording, press
DISPLAY
repeatedly until the desired
indication appears on the front display panel.
●
Each time you press
DISPLAY
, the time indication changes as
follows:
Elapsed recording time
]
Disc remaining time
]
Clock
]
(Back to
the beginning)
●
There is another way to check the disc remaining time. While the unit
is stopped or recording is in progress, press
REMAIN
. The list of disc
remaining times for all recording modes appears on the TV screen.
Recording Features
●
Turn on the unit.
●
Turn on the TV and select the video channel (or AV mode).
●
Slide the
TV/CABLE/DBS/DVD
switch to
DVD
.
●
Press
VCR/DVD
repeatedly so that the DVD lamp lights up on the
unit.
1
4
7
2
5
8
0
3
6
9
CH +/–
DISPLAY
REMAIN
TV/VCR
7
TV/VCR
VCR indicator lights off.
SR-MV30U_00.book Page 39 Tuesday, March 30, 2004 5:46 PM
