49
O
p
e
rat
in
g
e
xt
ern
a
l d
e
vi
ce
s
us
in
g
t
h
e re
mo
te
c
o
nt
rol
5
Release [DBS/VCR
F
].
NOTE
• It is recommended that you slide the remote
control mode selector to [AUDIO] after using this
function. Most of the other functions can be used
when the remote control mode selector is at
[AUDIO].
• Manufacturer codes are subject to change with-
out notice. You may not be able to operate the
VCR produced by the manufacturer.
• After replacing the batteries of the remote con-
trol, set the manufacturer code again.
Before the VCR operation, select the remote con-
trol mode for the VCR.
■
IMPORTANT
• Slide the remote control mode
selector to the lowest position.
1
Press [VCR].
2
Operate the remote control by
pointing it at the VCR.
NOTE
• When the remote control mode selector is slid to
the lowest position and [VCR] is pressed, some
buttons may not work.
• It is recommended that you slide the remote
control mode selector to [AUDIO] after using this
function. Most of the other functions can be used
when the remote control mode selector is at
[AUDIO].
Remote control button Usage
[DBS/VCR
F
]
Turns on/off the VCR.
[CH +/
–
]
Changes channels.
Number buttons
(1-10, 0, 10)
Selects the channels.
3
(playback)
Starts playback.
7
Stops
playback.
8
Pauses
playback.
¡
Fast-forwards the tape.
1
Fast-rewinds the tape.
[REC] +
3
(playback)
Starts recording.
[REC] +
8
Pauses
recording.
Using the remote control for the
VCR operation
Operating external devices using the remote control (continued
)
For the locations of the remote
control buttons, refer to page 46.
TH-F3[J_C]-09.fm Page 49 Monday, March 17, 2008 1:48 PM
