JVC SP-THF3F Instructions Manual Download Page 22

Page: 22 / 68

Playing

ourc

ext

nal d

evic

■

IMPORTANT

• Slide the remote control mode

selector to [AUDIO].

Press [AUDIO IN/DIGITAL IN].

• Each time you press [AUDIO IN/DIGITAL

IN], the display changes to “AUDIO IN” or
“DGTL IN” in the display window.

• “AUDIO IN” is for selecting the device con-

nected to the [AUDIO IN] terminals.

• “DGTL IN” is for selecting the device con-

nected to the [DIGITAL IN] terminal.

• You can also select the connected device as

the source by repeatedly pressing
[SOURCE] on the main unit.

Start playback on the connected
device.

Adjust the volume or the sound
quality for your preference.

• Refer to page 12.

NOTE

• Refer also to the operation manual for the con-

nected device.

• You can also operate your digital broadcast sat-

ellite and video cassette recorder using the
remote control of this system. Refer to pages
47-49.

You can select the gain of the signal from the
[AUDIO IN] terminals. Use the initial settings for
normal operation. If the sound is too small or too
loud, change the settings.

Press [AUDIO IN/DIGITAL IN]
repeatedly to select “AUDIO IN” in
the display window.

Hold down [ENTER].

• “LEVEL 1” or “LEVEL 2” appears in the dis-

play window.

Press [ENTER] repeatedly to
select “LEVEL 1” or “LEVEL 2”.

• Each time you press [ENTER], the display

toggles between “LEVEL 1” and “LEVEL 2”.

• The signal gain in “LEVEL 1” is lower than

that in “LEVEL 2”.

• The display returns to “AUDIO IN” in approx-

imately 5 seconds.

Remote control

mode selector

Playing back sources from
external devices

Selecting the signal gain

Playing back sources from external devices

TH-F3[J_C]-06.fm Page 17 Friday, March 21, 2008 11:40 AM

Summary of Contents for SP-THF3F





































































Search results

Summary of Contents for SP-THF3F

Reviews:

Related manuals for SP-THF3F

Brands by name

Popular brands

JVC SP-THF3F, Instructions Manual

Search results

Summary of Contents for SP-THF3F

Reviews:

Related manuals for SP-THF3F

Brands by name

Popular brands