1-7
RX-E112RSL/RX-E111RSL
Prior to performing the following procedure, remove
the top cover and front panel assembly.
Remove the two screws A attaching the power
switch board.
Remove the eight screws B attaching the system
control board.
Disconnect the card wire from the connector CN401,
CN402 and CN412 on the system control board.
Remove the switch buttons and indicator esc., if
needed.
1.
2.
3.
4.
Removing the system control board with
power switch board (See Fig.1 to 3)
Prior to performing the following procedure, remove
the top cover and front panel assembly.
Remove the screw C attaching the headphone jack
board to the front panel assembly.
1.
Removing the headphone jack board
(See Fig.1)
<Front panel assembly>
Fig.1
Fig.2
Fig.3
System control board
System control board (forward side)
Switch button
Indicator esc.
CN401
CN412
CN402
Headphone jack board
Headphone
jack board
Power switch board
Power switch board (forward side)
Front panel assembly (inner side)
Front panel assembly (inner side)
B
B
A
C
C