39
English
❏
Changing the transmittable signals for operating
a VCR
1
Press and hold VCR
.
2
Press VCR.
3
Enter the manufacturer’s code using buttons
1 – 9, and 0.
See “Manufacturers’ codes for VCR” on the right.
4
Release VCR
.
Now, you can perform the following operation on the VCR.
VCR
:
Turn on or off the VCR.
After pressing VCR, you can perform the following operations
on the VCR.
C/–:
Change the channel numbers on the
VCR.
1 – 10, 0, +10:
Select the channel numbers on the VCR.
3
:
Start playback.
7
:
Stop playback.
8
:
Pause playback.
FF:
Fast-wind a tape.
REW:
Rewind a tape.
REC PAUSE:
Enter recording pause. To start
recording, press this button then
3
.
See the instructions supplied with the VCR for details.
5
Try to operate your VCR by pressing VCR
.
When your VCR turns on or off, you have entered the correct
code.
If more than one code is listed for your brand of VCR,
try each
one until the correct one is entered.
Manufacturers’ codes for VCR
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
Manufacturer
Codes
JVC
01, 02, 03, 04
Aiwa
05
Akai
06, 07, 08
Bell+Howell
09
Daewoo
10
Emerson
11, 12, 13, 14, 15
Fisher
16, 17, 18, 19
G.E.
20, 21
Go Video
22
Gold Star
23
Go-Video A
24
Go-Video B
25
Hitachi
20, 26
Magnavox
27, 28, 29
Mitsubishi
30, 31, 32, 33
NEC
34, 35
Panasonic
36, 37
Philips
27
RCA
38
Samsung
39, 40, 41
Sanyo
16, 17, 18, 19
Scott
42
Sharp
43, 44
Shintom
45
Sony
46, 47, 48, 49, 50, 51
Symphonic
52
Teknica
53, 54
Toshiba
55
Zenith
56
Initial setting:
01
36-40RX-D301S[C]_f.p65
05.2.23, 16:25
39
