RX-8012PSL
1-5
Removing the audio board
(See Fig.11 and 12)
Prior to performing the following procedure, remove
the top cover, rear panel, DVD board, tuner board,
audio input board, video audio board, video board, S
video board and DSP board.
Disconnect the harness from the connector CN813
and CN814 on the main board.
Disconnect the harness from the connector CN931
/CN932 on the audio board.
Cut off the tie band.
Disconnect the connector CN71(on the power supply
board) and CN81(on the audio board) and remove the
relay board.
Disconnect the harness from the connector CN831 on
the main board.
Remove the three screws G and one screw H
attaching the audio board.
1.
2.
3.
4.
5.
6.
Removing the speaker board (See Fig.11)
Prior to performing the following procedure, remove
the top cover and rear panel.
Disconnect the harness from connector CN931/CN932
on the audio board.
Disconnect the harmess from connector CN813 and
CN814 on the main board.
1.
2.
Fig.10
Fig.11
Power
supply
board
Relay board
Audio board
Speaker board
CN71
CN81
H
CN814
CN813
CN931
/CN932
Power
transformer
G
Tie band
CN831
Main board
Fig.12
DSP board
CN601
Video board
S Video board
Video audio board
Fig.9
Audio board
Summary of Contents for RX-8012PSL
Page 27: ... M E M O ...
Page 51: ...RX 8012PSL 3 2 M E M O ...