background image

7

English

RIGHT

VIDEO

VIDEO

S-VIDEO

RIGHT

LEFT

AUDIO

MONITOR

OUT

VCR 

OUT

(REC)

TV SOUND

/

DBS

DVD

IN

(PLAY)

*

VIDEO

VIDEO

S-VIDEO

RIGHT

LEFT

AUDIO

VCR

OUT

(REC)

TV SOUND

/

DBS

DVD

A

B

D

C

IN

(PLAY)

DBS

RIGHT

VIDEO

VIDEO

S-VIDEO

RIGHT

LEFT

AUDIO

IN

(PLAY)

OUT

(REC)

IN

(PLAY)

OUT

(REC)

TV SOUND

/

DBS

DVD

VCR 2

DVD

VIDEO

VIDEO

S-VIDEO

RIGHT

LEFT

AUDIO

TV SOUND

/

S

DVD

A

B C

DBS tuner

To audio
output

To composite video output

Note:

* When connecting the TV to the TV SOUND/DBS jacks, DO NOT

connect the TV’s video output to the VIDEO jacks.

TV and/or DBS tuner

TV

Note:

When connecting the DBS tuner to the TV SOUND/DBS jacks,
change the source name, which will be shown on the display when
selected as the source, to “DBS.” See page 12 for details.

Å

To front left/right channel audio output (or to audio mixed
output if necessary)

ı

To S-video output

Ç

To composite video output

DVD player

DVD player

Video component connections

Use the cables with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, the red plug to the
audio right jack, and the yellow plug to the video jack.
If DVD player and TV have S-video (Y/C-separation) terminals,
connect them using S-video cables (not supplied). Connecting these
video components through the S-video input/output terminals will
give you better picture playback quality.

IMPORTANT:

This receiver is equipped with both the composite video and
S-video input terminals for the DVD player connection.
You do not have to connect both the composite video and S-
video terminals. However, remember that the video signals
from the composite video input terminal are output only
through the composite video output terminals, while the
ones from the S-video input terminal are output only
through the S-video output terminal.
Therefore, if your DVD player is connected to the receiver
only through the S-video input terminal, you cannot record the
picture from the DVD player on the VCR.
In addition, if the TV and the DVD player are connected to the
receiver through the different video terminals, you cannot view
the playback picture from the DVD player on the TV.

VCR

Å

To left/right channel audio output

ı

To left/right channel audio input

Ç

To video output

Î

To video input

To audio
output

VCR

To composite video input

To S-video input

Connect the TV to the
MONITOR OUT jack to view
the playback picture from the
other connected video
components.

EN01-08.RX-778V[C]/1

99.4.28, 2:06 PM

7

Summary of Contents for RX-778VBK - Audio/Video Receiver


















































Reviews: