JVC RX-778VBK - Audio/Video Receiver Instruction Manual Download Page 29

Page: 29 / 49

English

Activating the DSP Modes

You can use only one DSP mode at a time. When a DSP mode is
activated, another DSP mode is canceled if in use.

For Dolby Pro Logic and Dolby Digital Surround

On the front panel:

1. Press DOLBY SURROUND so

that the lamp on the button lights
up.

• Each time you press the button, the Dolby

Surround turns on and off alternately.

2. Select and play a sound source.

• To enjoy Dolby Pro Logic, play back a software encoded with

Dolby Surround and labeled with

DOLBY SURROUND

mark.

• To enjoy Dolby Digital, play back a software encoded with

Dolby Digital and labeled with

D I G I T A L

mark.

To cancel the Dolby Surround mode

Press DOLBY SURROUND again so that the
lamp on the button goes off. (“SURROUND
OFF” appears on the display.)

From the remote control:

1. Press SURROUND ON/OFF so

that the lamp on the DOLBY
SURROUND button on the front
panel lights up.

• Each time you press the button, the Dolby

Surround turns on and off alternately.

• You can also turn on Dolby Surround by

pressing SURROUND MODE. (See page
22 for more details.)

2. Select and play a sound source.

• To enjoy Dolby Pro Logic, play back a software encoded with

Dolby Surround and labeled with

DOLBY SURROUND

mark.

• To enjoy Dolby Digital, play back a software encoded with

Dolby Digital and labeled with

D I G I T A L

mark.

To cancel the Dolby Surround mode

Press SURROUND ON/OFF again.
(“SURROUND OFF” appears on the display.)

DOLBY SURROUND

SURROUND

ON/OFF

SURROUND

ON/OFF

DOLBY SURROUND

For the other DSP modes

On the front panel:

1. Press DSP MODE repeatedly until

the mode you want appears on the
display.

• Each time you press the button, the DSP

modes change. (See page 22 for more
details.)

2. Select and play a sound source.

• To enjoy 3D-PHONIC and JVC Theater Surround, play back a

software:
– encoded with Dolby Surround and labeled with

DOLBY SURROUND

mark.

– encoded with Dolby Digital and labeled with

D I G I T A L

mark.

To cancel the DSP mode

Press DSP MODE repeatedly until “DSP OFF”
appears on the display.

From the remote control:

1. Press SURROUND MODE

repeatedly until the DSP mode you
want appears on the display.

• Each time you press the button, the DSP

modes change. You can also turn on Dolby
Surround. (See page 22 for more details.)

2. Select and play a sound source.

• To enjoy 3D-PHONIC and JVC Theater Surround, play back a

software:
– encoded with Dolby Surround and labeled with

DOLBY SURROUND

mark.

– encoded with Dolby Digital and labeled with

D I G I T A L

mark.

To cancel the DSP mode

Press SURROUND MODE repeatedly until
“DSP OFF” appears on the display.

DSP MODE

SURROUND

MODE

DSP MODE

SURROUND

MODE

EN19-27.RX-778V[C]/1

99.4.23, 11:55 AM

Summary of Contents for RX-778VBK - Audio/Video Receiver


















































Search results

Summary of Contents for RX-778VBK - Audio/Video Receiver

Reviews:

Related manuals for RX-778VBK - Audio/Video Receiver

Brands by name

Popular brands

JVC RX-778VBK - Audio/Video Receiver, Instruction Manual

Search results

Summary of Contents for RX-778VBK - Audio/Video Receiver

Reviews:

Related manuals for RX-778VBK - Audio/Video Receiver

Brands by name

Popular brands