JVC RX-778VBK - Audio/Video Receiver Instruction Manual Download Page 31

Page: 31 / 49

English

Listening at Low Volume (Loudness)

(Also see page 11)

1. Press MENU.

The MAIN MENU appears on the TV.
• Pressing one of the

buttons also displays the

MAIN MENU.

2. Press

to move

to “SOUND

CONTROL,” then press

The SOUND CONTROL menu appears.

3. Press

to move

to “LOUDNESS.”

4. Press

to turn the

loudness “ON” or
“OFF.”

5. When you finish, press EXIT repeatedly until the

menu disappears from the TV.

Attenuating the Input Signal

(Also see page 11)

1. Press MENU.

The MAIN MENU appears on the TV.
• Pressing one of the

buttons also displays the

MAIN MENU.

2. Press

to move

to “SOUND

CONTROL,” then press

The SOUND CONTROL menu appears.

3. Press

to move

to “INPUT ATT.”

4. Press

to turn the

Input Attenuator mode
“ATT ON” or
“NORMAL.”

5. When you finish, press EXIT repeatedly until the

menu disappears from the TV.

Adjusting the Subwoofer Output Level

(Also see page 11)

1. Press MENU.

The MAIN MENU appears on the TV.
• Pressing one of the

buttons also displays the

MAIN MENU.

2. Press

to move

to “SOUND

CONTROL,” then press

The SOUND CONTROL menu appears.

3. Press

to move

to “SUBWFR LEVEL.”

4. Press

to adjust

the subwoofer output
level.

5. When you finish, press EXIT repeatedly until the

menu disappears from the TV.

Adjusting the DSP Modes

(Also see pages 23 – 26)

1. Press MENU.

The MAIN MENU appears on the TV.
• Pressing one of the

buttons also displays the

MAIN MENU.

2. Press

to move

to “MODE.”

3. Press

to select the

DSP mode you want to
adjust.

• In this example,

“THEATER” is selected.

4. Press

to move

to “SOUND
CONTROL,” then
press

The SOUND CONTROL
menu appears.

5. Press

to move

to “SURROUND
LEVEL,” then press

The SURROUND LEVEL
menu appears.

6. Press

to move

to the item you want to

set or adjust, then press

On these adjustment menus, you can do the following:

For 3D-PHONIC

(3D ACTION, 3D DIGITAL, 3D THEATER)

“DSP EFFECT”:

Select the effect level.

For DAP

(LIVE CLUB, DANCE CLUB, HALL, PAVILION)

“REAR L LEVEL”: Adjust the left rear speaker output

level.*

“REAR R LEVEL”: Adjust the right rear speaker

output level.*

“DSP EFFECT”:

Select the effect level.

EN28-38.RX-778V[C]/1

99.4.26, 8:18 PM

Summary of Contents for RX-778VBK - Audio/Video Receiver


















































Search results

Summary of Contents for RX-778VBK - Audio/Video Receiver

Reviews:

Related manuals for RX-778VBK - Audio/Video Receiver

Brands by name

Popular brands

JVC RX-778VBK - Audio/Video Receiver, Instruction Manual

Search results

Summary of Contents for RX-778VBK - Audio/Video Receiver

Reviews:

Related manuals for RX-778VBK - Audio/Video Receiver

Brands by name

Popular brands