Page 26
English
Switching to a Broadcast Program of Your Choice Temporarily
Another convenient RDS service is called “EON (Enhanced Other Network).”
This allows the receiver to switch temporarily to a broadcast program of your choice (NEWS, TA, and/or
INFO) from a different station except in the following cases:
• When you are listening to a non-RDS stations (all AM (MW/LW) and some FM stations).
• When the last received FM station is a non-RDS station.
On the front panel only:
1. Press EON so that the last selected program type appears on the display.
The receiver enters EON standby mode.
2. Press TA/NEWS/INFO until the program type you want appears on the display.
Each time you press the button, the display changes to show the following.
TA:
Traffic Announcement in your area.
NEWS:
News.
INFO:
Programs on medical service, weather forecast, etc.
To stop listening to the program selected by EON:
Press EON so that the program type (TA/NEWS/INFO) goes off from the display. The receiver enters EON
off mode and goes back to the previously selected source.
Each time you press EON, the EON mode alternates between standby mode and off mode.
Notes:
• In EON standby mode, if you change the source to AM (MW/LW) or if you carry out synchronized recording
(see page 41), EON standby mode is canceled temporarily. The receiver goes back to EON standby mode
again when you have finished that operation.
• While listening to a program tuned in by the EON function, you can only use STANDBY/ON
, EON,
and DISPLAY MODE on the front panel or AUDIO
and DISPLAY MODE on the remote control.
• When the receiver is turned off (into standby mode), the EON function is also turned off.
CAUTION:
When the source alternates intermittently between the station tuned in by the EON function and
the currently selected source, press EON to cancel the EON function. This is not a malfunction
of the receiver.
CASE 2 If there is a station broadcasting the program you have
selected
The receiver stops playing the current source, and tunes in
the program. The indicator of received PTY code starts
flashing.
When the program is over, the receiver goes back to the
previously selected source, but still remains in EON
standby mode.
CASE 1 If there is no station broadcasting the program
you have selected
The receiver continues playing the current source.
When a station starts broadcasting the program
you have selected, the receiver automatically
switches to the station. The indicator of received
PTY code starts flashing.
When the program is over, the receiver goes back
to the previously selected source, but still remains
in EON standby mode.
EON
TA/ NEWS /INFO
EON
MENU
See also
page 39.
TA
NEWS/INFO
TA/INFO
NEWS
TA/NEWS/INFO
INFO
TA/NEWS
‘
‘
‘
Front panel
Front panel
RX-730RBK(EF)0054-001A.En.01-28
97.7.25, 6:28 PM
26
