JVC RX-730R, Instructions Manual

Page: 26 / 58

Page 21
English
CAUTION:
The preset channels may be erased in the following cases:
• When you press
POWER to set it in the
—
OFF position.
• When you unplug the power cord.
• When a power failure occurs.
Tuning in a preset station
On the front panel:
1. Press TUNER so that the Control
% %
% % %
/
fi fi
fi fi fi
/
@ @
@ @ @
/
# #
# # #
buttons work for tuner settings.
The lamp next to the button lights up.
2. Press Control
% % % % %
/
fi fi fi fi fi
until “–” appears on the display.
3. Press Control
@ @
@ @
@
/
# #
# #
#
to select a preset channel.
Each time you press the button, the preset channels changes.
• Pressing Control
@
changes preset channels in decreasing order.
• Pressing Control
#
changes preset channels in increasing order.
From the remote control:
1. Press FM or AM.
The last received station of the selected band is tuned in.
2. Open the outside panel of the remote control and press PRESET C/–.
To select a preset channel number directly, press 10 keys on the inside panel.
• For channel number 5, press 5.
• For channel number 15, press +10 then 5.
• For channel number 20, press +10 then 10.
• For channel number 30, press +10, +10, then 10.
Note:
When you use the 10 keys on the remote control, be sure that they are activated for tuner, not for the CD
and others. (See page 42.)
Selecting the FM Reception Mode
You can change the FM reception mode while listening an FM broadcast.
You can also store the FM reception mode for each preset station. (See page 20.)
On the front panel:
1. Press TUNER so that the Control
% % % % %
/
fi fi fi fi fi
/
@ @ @ @ @
/
# # # # #
buttons work for tuner settings.
The lamp next to the button lights up.
2. Press Control
% %
% %
%
/
fi fi
fi fi
fi
until “FM MODE” appears on the display.
3. Press Control
@ @ @ @ @
/
# # # # #
to select either “AUTO” or “MONO.”
• Normally select “AUTO.”
• When an FM stereo broadcast is hard to receive or noisy, select “MONO.”
AUTO: When a program is broadcast in stereo, you will hear stereo sound; when in
monaural, you will hear monaural sounds. This mode is also useful to suppress
static noise between stations.
The MUTE AUTO indicator lights up on the display.
MONO: Reception will be improved although you will lose the stereo effect. In this
mode, you will hear noise while tuning into the stations.
The MUTE AUTO indicator goes off on the display.
From the remote control:
Press FM MODE/MUTE.
Each time you press the button, “AUTO” and “MONO” alternately appears on the display.
Note:
When you use the FM MODE/MUTE button, be sure that 10 keys are activated for tuner, not for the CD and
others. (See page 42.)
Front panel
FM AM
Remote:
Inside
Remote:
Outside
PRESET
CHANNEL
MEMORY TUNER
See also
page 39.
MENU
MEMORY TUNER
Front panel
0
FM
MODE/MUTE
Remote: Inside
RX-730RBK(EF)0054-001A.En.01-28 97.7.25, 6:27 PM 21